Floor Edging Sander

A high performance disc floor sander (edger) that delivers unrivalled balance and feel. The choice of professionals - delivers the power to tackle the toughest of jobs. It does not come complete with sanding discs and dustbags, please add these to your basket The Floor edging Sander will sand a high quality - score-free finish on hard and soft wood floors - including parquet and any solid wood surface that requires rapid sanding and levelling. It can also be used on a wide range of other surfaces including some types of decking - fibre board - cork - composition and engineered floors. Ideal for confined areas such as closets - stair treads and sanding right up to the edge of a floor (edge sanding) - without damage to the base board - mouldings or skirting. This machine is 110 V and you will need a transformer to use it. You may also need a 110V extension lead. Based On: Hiretech HT7 Disc Floor Edging Sander Off Load Current: 5A Average Load Current: 8 A Noise: 100 dBA at 1 m Vibration: 2.71 m/s² rms Motor: 13 -000 rpm Disc: 3 -300 rpm Dimensions W x D x H: 276 mm x 505 mm x 325 mm Weight Net: 16.4 kg Sanding Disc Diameter: 178 mm Grades are: P40 Grit for general sanding and stripping of floors that are in a poor or average condition. P80 Grit for light sanding and stripping of floors that are in average condition, first sanding of floors that have been previously sanded and need renovation and for progression sanding to next stage after using coarse sanding sheets. P120 for fine sanding of floors that are in good condition and progression sanding to final stage after using medium grit sanding sheets.