Floor Sander Electric

Floor Sander Hire With a low voltage trip switch this electric Floor Sander is ideal for both home and professional use. Used to sand all types of wooden floors including parquet prior to varnishing or staining . The sander does not come complete with sanding sheets and dustbags, please add these to  your basket. We would recommend at least 3 of each grit of sanding sheets per room and 2 dust bags minimum per room. Before using the floor sander make sure that all nails - staples and any other sharp objects are removed from the floor. This will prevent the sheets from tearing. Based On: Hiretech HT8 Drum Floor Sander Off Load Current: 5 A Average Load Current: 8 A Noise: 95 dBA at 1 m Vibration: 1.60 m/s² rms Motor: 8 -500 rpm Drum: 3 -300 rpm Dimensions W x D x H: 322 mm x 940 mm x 855 mm Weight Net: 41.5 kg Sanding Sheet Width: 200 mm Also known as a Belt Sander - the four brush motor powers a sanding drum that is dynamically balanced and is covered in a unique drum rubber. This machine is 110V and a transformer will be required. A 110V extension lead may also be needed.

Grades are: P40 Grit for general sanding and stripping of floors that are in a poor or average condition. P80 Grit for light sanding and stripping of floors that are in average condition, first sanding of floors that have been previously sanded and need renovation and for progression sanding to next stage after using coarse sanding sheets. P120 for fine sanding of floors that are in good condition and progression sanding to final stage after using medium grit sanding sheets.